Director of Engineering, Reentry Torrance, California, United States
Company: Tbwa Chiat/Day Inc
Location: Torrance
Posted on: November 13, 2024
Job Description:
Turning Space into a Transportation Layer for EarthWho We
Are:Eras of humanity can often be defined by a dominant
transportation mode - horse drawn carriage, ocean faring boats, or
aircraft. These were spurred by a small group of people rigorously
focused on building technology to achieve faster access to more of
the world. We seek to usher in a new era of humanity defined by
universal access to the whole globe free of borders and the
presence of a routine way from space to Earth. To do this, we are
building highly maneuverable re-entry vehicles that can loiter in
orbit before precision landing back on Earth.What You'll Do:As the
head of Inversion's Reentry teams, you will spearhead the creation,
design, and leadership of Inversion's products' reentry systems and
vehicles. Inversion's next-generation spacecraft is capable of
operating in space and, on command, reentering anywhere in the
world. Inversion's hypersonic lifting body design will create a
highly maneuverable, highly accurate, and low-cost to produce
vehicle that will be an industry-first. In this role, you will:
- Report directly to the Chief Technology Officer (CTO).
- Lead technical and programmatic architecture and execution of
the Reentry systems on Inversion's Arc vehicle including
Aerodynamics, Thermal Protection Systems (TPS), Primary Structures,
and Control Surfaces.
- Responsible for the architecture definition, simulation-based
performance analysis, development of hardware, validation of
design, and production of a reentry vehicle.
- Assemble an incredibly talent-dense team of engineers to
design, analyze, build, test, and produce a reentry
vehicle.Required Qualifications:
- Bachelor's degree in Aerospace or Mechanical Engineering, or
equivalent experience in a relevant field with a minimum of 10+
years of engineering complex systems.
- Minimum of 4 years of experience in hypersonic, supersonic,
reentry, or rocketry flight sciences.
- Demonstrated success in vehicle design and OML design that
culminated in flight testing.
- Strong knowledge of Computational Fluid Dynamics (CFD), wind
tunnel testing, aerothermal analysis, and glide trajectories.
- Industry leadership experience managing interdisciplinary teams
and responsibility over program-level technical
decision-making.
- Strong fundamentals on aerospace-level primary structures
requirements and design.
- Successful track record of taking projects from design through
deployment into production.Desired Qualifications:
- Master's degree or PhD in Aerospace or Mechanical Engineering,
or an equivalent field.
- Professional experience executing modeling and simulation tools
for hypersonic applications.
- Experience with key aspects of hypersonic system modeling such
as: hypersonic boundary layer, heat transfer modeling, ablation,
non-equilibrium thermodynamics, chemistry modeling, turbulence,
etc.
- Strong understanding of ablative thermal protection materials,
their capabilities, and how to analyze them.The California annual
base salary for this role is currently $175,000-$276,000. Pay
Grades are determined by role, level, location, and alignment with
market data. Individual pay will be determined on a case-by-case
basis and may vary based on the following considerations:
interviews and an assessment of several factors that are unique to
each candidate, job-related skills, relevant education and
experience, certifications, abilities of the candidate and internal
equity. To conform to U.S. Government space technology export
regulations, including the International Traffic in Arms
Regulations (ITAR) you must be a U.S. citizen, lawful permanent
resident of the U.S., protected individual as defined by 8 U.S.C.
1324b(a)(3), or eligible to obtain the required authorizations from
the U.S. Department of State. Learn more about the ITARhere .
Inversion provides equal employment opportunities to all employees
and applicants without regard to race, color, religion, age, sex,
gender identity, sexual orientation, national origin, veteran
status, or disability. Inversion collects and processes personal
data in accordance with applicable data protection laws. If you are
a US Job Applicant see the CCPA Privacy Policy Notice for further
details. Accepted file types: pdf, doc, docx, txt, rtfAccepted file
types: pdf, doc, docx, txt, rtf LinkedIn Profile Website What are
your base salary ($USD) expectations? Are you open to relocating to
our corporate headquarters in Torrance, CA? Select... Are you
authorized to work in the United States without sponsorship?
Select... Were you referred to Inversion by a current employee?
Select... If you were referred, please provide the name of the
employee. To conform to U.S. Government space technology export
regulations, including the International Traffic in Arms
Regulations (ITAR) you must be a U.S. citizen, lawful permanent
resident of the U.S., protected individual as defined by 8 U.S.C.
1324b(a)(3), or eligible to obtain the required authorizations from
the U.S. Department of State. Do you meet the above criteria?
Select... Voluntary Self-IdentificationFor government reporting
purposes, we ask candidates to respond to the below
self-identification survey.Completion of the form is entirely
voluntary. Whatever your decision, it will not be considered in the
hiringprocess or thereafter. Any information that you do provide
will be recorded and maintained in aconfidential file.As set forth
in Inversion's Equal Employment Opportunity policy,we do not
discriminate on the basis of any protected group status under any
applicable law.If you believe you belong to any of the categories
of protected veterans listed below, please indicate by making the
appropriate selection.As a government contractor subject to the
Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we
request this information in order to measurethe effectiveness of
the outreach and positive recruitment efforts we undertake pursuant
to VEVRAA. Classification of protected categoriesis as follows:A
"disabled veteran" is one of the following: a veteran of the U.S.
military, ground, naval or air service who is entitled to
compensation (or who but for the receipt of military retired pay
would be entitled to compensation) under laws administered by the
Secretary of Veterans Affairs; or a person who was discharged or
released from active duty because of a service-connected
disability.A "recently separated veteran" means any veteran during
the three-year period beginning on the date of such veteran's
discharge or release from active duty in the U.S. military, ground,
naval, or air service.An "active duty wartime or campaign badge
veteran" means a veteran who served on active duty in the U.S.
military, ground, naval or air service during a war, or in a
campaign or expedition for which a campaign badge has been
authorized under the laws administered by the Department of
Defense.An "Armed forces service medal veteran" means a veteran
who, while serving on active duty in the U.S. military, ground,
naval or air service, participated in a United States military
operation for which an Armed Forces service medal was awarded
pursuant to Executive Order 12985. Select... Voluntary
Self-Identification of Disability Form CC-305 Page 1 of 1 OMB
Control Number 1250-0005 Expires 04/30/2026 Voluntary
Self-Identification of Disability Form CC-305 Page 1 of 1 OMB
Control Number 1250-0005 Expires 04/30/2026
Why are you being asked to complete this form?We are a federal
contractor or subcontractor. The law requires us to provide equal
employment opportunity to qualified people with disabilities. We
have a goal of having at least 7% of our workers as people with
disabilities. The law says we must measure our progress towards
this goal. To do this, we must ask applicants and employees if they
have a disability or have ever had one. People can become disabled,
so we need to ask this question at least every five
years.Completing this form is voluntary, and we hope that you will
choose to do so. Your answer is confidential. No one who makes
hiring decisions will see it. Your decision to complete the form
and your answer will not harm you in any way. If you want to learn
more about the law or this form, visit the U.S. Department of
Labor's Office of Federal Contract Compliance Programs (OFCCP)
website at www.dol.gov/ofccp .How do you know if you have a
disability?A disability is a condition that substantially limits
one or more of your "major life activities." If you have or have
ever had such a condition, you are a person with a disability.
Disabilities include, but are not limited to:
- Alcohol or other substance use disorder (not currently using
drugs illegally)
- Autoimmune disorder, for example, lupus, fibromyalgia,
rheumatoid arthritis, HIV/AIDS
- Blind or low vision
- Cancer (past or present)
- Cardiovascular or heart disease
- Celiac disease
- Cerebral palsy
- Deaf or serious difficulty hearing
- Diabetes
- Disfigurement, for example, disfigurement caused by burns,
wounds, accidents, or congenital disorders
- Epilepsy or other seizure disorder
- Gastrointestinal disorders, for example, Crohn's Disease,
irritable bowel syndrome
- Intellectual or developmental disability
- Mental health conditions, for example, depression, bipolar
disorder, anxiety disorder, schizophrenia, PTSD
- Missing limbs or partially missing limbs
- Mobility impairment, benefiting from the use of a wheelchair,
scooter, walker, leg brace(s) and/or other supports
- Nervous system condition, for example, migraine headaches,
Parkinson's disease, multiple sclerosis (MS)
- Neurodivergence, for example, attention-deficit/hyperactivity
disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia,
other learning disabilities
- Partial or complete paralysis (any cause)
- Pulmonary or respiratory conditions, for example, tuberculosis,
asthma, emphysema
- Short stature (dwarfism)
- Traumatic brain injury Disability Status Select... PUBLIC
BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995
no persons are required to respond to a collection of information
unless such collection displays a valid OMB control number. This
survey should take about 5 minutes to complete.
#J-18808-Ljbffr
Keywords: Tbwa Chiat/Day Inc, Buena Park , Director of Engineering, Reentry Torrance, California, United States, Engineering , Torrance, California
Didn't find what you're looking for? Search again!
Loading more jobs...